Pros and Cons of Lost-Foam Casting


Not to be confused with investment casting, lost-foam casting is a molding process used to create objects or “castings” from a mold. It involves the use of a polystyrene pellets, which are inserted into the mold cavity. Molten metal is then poured into the mold cavity, which causes the polystyrene pellets to expand. As the polystyrene pellets expand, they form a solid casting.

Lost-Foam Casting Pros:

Lost-foam casting offers several benefits, one of which is ease of use. Most casting processes are complex and require over a half-dozen steps. Lost-foam casting, however, is relatively simple and straightforward: The polystyrene pellets are injected into the mold cavity, after which molten metal is added. The heat from the molten metal will cause the polystyrene pellets to vaporize, resulting in the creation of a casting that can be ejected form the mold cavity.

Another benefit of lost-foam casting is its ability to create castings with high dimensional accuracy. In certain applications, dimensional accuracy is paramount. Automotive engines, for instance, are often manufactured using lost-foam casting because of its exceptionally high dimensional accuracy. Automakers can use it to build engine blocks in a specific size that offers optimal performance for their vehicles.

There’s also no flash with lost-foam casting. Flash, of course, consists of excess and unwanted material that accumulates on a casting. With that said, flash is usually caused by draft. Lost-foam casting doesn’t require the use of a draft, however, so it’s naturally protected against flash. This casting process offers clean castings with high dimensional accuracy.

Lost-Foam Casting Cons

On the other hand, the castings created by lost-foam casting aren’t particularly strong. With their low strength, they are naturally susceptible to damage, such as fracturing and breaking, when stressed.

When compared to other casting processes, lost foam is typically more expensive. Specifically, the molds used in lost-foam casting cost more than those used in other casting processes, which may deter some manufacturing companies from using it.

In Conclusion

Lost-foam casting is a casting process in which polystyrene pellets and molten metal is injected into a mold cavity. The molten metal causes the pellets to evaporate. Once evaporated, the hardened pellets form a casting that can be ejected from the mold cavity. Lost-foam casting is relatively easy to perform, offers high dimensional accuracy and is protected against flash. However, the castings are usually weaker and cost more to produce than those of other processes.

No tags for this post.