What Are Clip Blocks and How Do They Work?


Clip blocks by Monroe

Clip blocks offer a simple solution when working with panels and aluminum profiles. You may need to temporarily hold a panel to an aluminum profile. Rather than using screws or other traditional fasteners to hold these components together, you can use a clip block. Consisting of a block-shaped clip, it will hold the panel and aluminum profile together so that you can work on them.

Overview of Clip Blocks

Clip blocks temporary fasteners that feature a built-in clip. They are used to secure panels to aluminum profiles. You can clip them onto panels and aluminum profiles. After working on the panels and aluminum profiles, you can remove them.

How Clip Blocks Work

Even if you’re unfamiliar with them, you shouldn’t have any trouble using clip blocks. They feature a simple design consisting of a block-shaped chip. You can clip them onto the edges of panels and aluminum profiles. After installing a clip block, the panel will be attached to the aluminum profile.

You won’t have to drill any holes into the panel and aluminum profile on which you are working, nor will you have to weld them together. Chip blocks offer an alternative solution. They will allow you to attach panels to aluminum profiles by clipping them together.

Clip Block Locking Force: What You Should Know

You should consider the locking force when choosing clip blocks. Some clip blocks have a higher locking force than others. There are clip blocks with a locking force of 8 N, for instance, and there are clip blocks with a locking force of 10 N.

What is locking force exactly? Expressed in Newtons (N), it’s a measurement of how much force clip block applies. The higher the locking force, the more force the clip block will apply. As a result, the panel and aluminum profile will be less likely to separate. Clip blocks with a high locking force will hold the panels and profiles together by applying more force than their counterpart with a low locking force.

In Conclusion

They may be small in size, but clip blocks can make a big difference in manufacturing processes. If you regularly work with panels and aluminum profiles, you should consider using them. Rather than drilling or welding the panels and profiles, you can secure them together with clip blocks. Clip blocks are block-shaped clips that you can clip onto the ends of panels and aluminum profiles.

Looking for Clip Blocks?

Click below to browse Monroe's Clip Blocks!

Browse Clip Blocks